45530603TH Rev.2 6-23Oki Data CONFIDENTIAL 6. REPLACEMENT OF PARTS6.2.27 Belt-Drive-Assy/Fuser-Drive-Assy/Belt-Mini-Pitch(1) Remove the Motor-Assy-ID.(Refer to section 6.2.22)(2) Remove the Motor-FAN.(Refer to section 6.2.24)(3) Remove the four screws(silver)(6mm) and remove the Contact-ID-Assy .(4) Remove the five screws(silver)(6mm) and remove the Contact-TR-Assy .(5) Remove the two screws(silver)(6mm) and remove the Cover-Cable-FU .(6) Remove the four Round-head screws(black)(6mm) and remove the Fuser-Drive-Assy .(7) Remove the screw(silver)(6mm) and remove the Gear-Assy-WT .(8) Remove the three screws(silver)(6mm) and remove the Belt-Drive-Assy andBelt-Mini-Pitch .6.2.28 MPT-Unit(1) Open the MPT.(2) Open the Cover-Front.(3) Remove the Cover-Rear.(Refer to section 6.2.11)(4) Remove the screw(silver)(6mm) and remove the Cover-Rear-Handle .(5) Remove the Cover-In-C and Cover-Harness .(6) Remove the screw(black)(8mm) and remove the Cover-Board and cable.(7) Remove the four screws(silver)(6mm) and remove the MPT-Unit .
