Oki C911 Maintenance Manual

Also see for C911 DICOM: Disassembly & reassembly procedures User manual User manual Product specification User manual

Contents

Oki C911 Maintenance Manual Manual pdf 36 page image

45530603TH Rev.2 3-2Oki Data CONFIDENTIAL 3. INSTALLATION3.1 Cautions, and do’s and don’ts• Do not place the printer in any high-temperature location or a near heat source.• Do not place the printer in a location where chemical reaction may occur(laboratory and such a place ).• Do not place the printer in the proximity of inflammable solvents, such asalcohol and paint thinner.• Do not place the printer within reach of children.• Do not place the printer on an unstable surface (e.g., on any rickety bench or ona slanting place).• Do not place the printer in a location with moisture, heavy dust or in direct sun.• Do not place the printer in an environment with sea wind or corrosive gas.• Do not place the printer in a location with heavy vibration.• In the event that the printer is inadvertently dropped or its cover is damaged,remove the power plug from the power outlet and contact the customerinformation center.Such mishap could cause to an electric shock, fire or injury.• Do not connect any AC cable, printer cable in any other manner than the wayspecified in the manual. Failure to observe the above could result in fire.• Do not stick in an object into the vent hole.Such action could cause to an electric shock, fire or injury.• Do not place a glass filled with water or such something on the printer.Such action could cause to an electric shock or fire.• When the printer cover is opened, be careful not to touch the fuser unit.It may cause burns.• Do not throw the toner cartridges or the image drum cartridges into fire.Dust explosion could cause burns.• Do not use a highly combustible spray near the printer.It may cause a fire because the printer contains parts that get extremely hot.• In the event that the cover becomes unusually hot, emits smoke, bad smell, orabnormal noise, remove the power plug from the power outlet and contact thecustomer information center.Fire could break out.• If water or any other liquid enters the inside of the printer, remove the powerplug from the power outlet and contact Customer Center.Fire could break out.• If someone drops foreign objects such as a clip in the printer, remove the powerplug from the outlet and take out the foreign objects.It may cause an electric shock, fire, or injury.• Do not operate or disassemble the printer in any other manner than the wayspecified in the manual.Failure to observe this warning could result in an electric shock, fire or injury.• Do not place the printer in a location where its vent hole is blocked.• Do not place the printer directly on a shag carpet or rug.• Do not place the printer in a sealed room or other location with poor ventilationor permeability.• Make sure to ventilate sufficiently when continuously using the printer in a smallroom for a long time.• Place the printer away from a strong magnetic field or noise source.• Place the printer away from a monitor or TV.• When moving the printer, hold the carrying lever and carrying handles.• This printer, which weighs approximately 117 kg, should be lifted by four ormore people.• While the printer power is on or the printer is printing, do not come close to thepaper exit. Such action could cause to injury.• Do not expose the image drum cartridge to direct sunshine and strong light(about 1500 lux). And do not expose it to room light for more than 5 minutes.When the precautionary notes concerning the setting and operation are explained, thecustomer should be referred to the precautionary notes given in the user’s manual. Especially,give thorough explanation on the AC Cable.