IndexTroubleshooting12Maintenance- 86 -Transporting and moving the devicez Transporting and moving the deviceThis section describes about transporting or moving the device.When moving the deviceCAUTION There is a risk of injury.The printer weighs approx. 97kg* for C911/C931/ES9411dn/ES9431dn models, and approx. 117 Kg*for C941/ES9541dn model. Therefore, make sure touse at least 4 people when lifting.*: Includes consumables such as the image drum and tonercartridge, etc.1 Press and hold the power switch forapprox. 1s. Check that the operationpanel is completely switched off afterthat, and switch off the main powersupply by pulling the main power supplyswitch to the OFF (O) side.2 Remove all cables.z Power supply cable and earthing cordz LAN cable/USB cable3 Remove paper from the tray.4 Life the device with 4 people, and moveit to the destination.Transporting the deviceCAUTION There is a risk of injury.The printer weighs approx. 97kg* for C911/C931/ES9411dn/ES9431dn models, and approx. 117 Kg*for C941/ES9541dn model. Therefore, make sure touse at least 4 people when lifting.*: Includes consumables such as the image drum and tonercartridge, etc.Notez Because image drums (green parts) can easily getdamaged, handle with adequate care.z Do not expose the image drum to direct sunlight or stronglight (About 1,500 lux or more). Do not keep it for morethan 5 minutes even under room lighting.1 Press and hold the power switch forapprox. 1s. Check that the operationpanel is completely switched off afterthat, and switch off the main powersupply by pulling the main power supplyswitch to the OFF (O) side.2 Remove all cables.z Power supply cable and earthing cordz LAN cable/USB cable3 Remove paper from the tray.4 Remove all toner cartridges.5 Lift the device with 4 people, place it inthe packing box, and fix the printer.6 Transport it.