Oki CX1145 MFP Function Manual

Also see for CX 1145 MFP: Configuration guide Fax guide User functions guide Printing guide Operator's manual for basic function

Contents

Oki CX1145 MFP Function Manual Manual pdf 173 page image

5 System Administration172 Using e-Filing Backup/Restore UtilityUsing e-Filing Backup/Restore UtilityThe Drivers & Network Utilities CD-ROM includes the e-Filing Backup/Restore Utility. You canuse these utilities to set the e-Filing and to backup or restore the image data in it for the OKI1100 series MFP.Installing e-Filing Backup/Restore UtilityYou can install e-Filing Backup/Restore Utility from Drivers & Network Utilities CD-ROM.System RequirementsThe e-Filing Backup/Restore Utility is available for following environments:y Display Resolution1024 x 768 dots or morey Display ColorHigh Color (16bit) or higher is recommendedy CPUPentium 133 MHz minimum (Pentium 266 MHz or faster recommended)y OSWindows 2000 Service Pack 4Windows XP Service Pack 1Windows VistaWindows Server 2003 Service Pack 1y Required SoftwareMicrosoft Internet Explorer 5.5 Service Pack 2 or later must be installed (for the IPv4 only)Microsoft Internet Explorer 7.0 or later must be installed (for the IPv6 only)Microsoft Internet Explorer is enabled to access the e-Filing web utility on this equipment.- The proxy settings must be configured correctly to enable the access.- The browser must not be offline.To backup/restore e-Filing data using e-Filing Backup/Restore Utility, the FTP Server option thatcan be set in the Network settings of TopAccess must be enabled.Installing e-Filing Backup/Restore UtilityThis procedure describes an installation on Windows XP. The procedure is the same whenother versions of Windows are used.y You must log into Windows as a user who has the “Administrators” privilege, when using theWindows NT 4.0, Windows 2000, Windows XP, or Windows Server 2003.y When using Windows Vista, you can install by entering the Administrator password at thetime of starting the installer, although you have not logged in as a user with Administratorprivilege.1 Insert the Drivers & Network Utilities CD-ROM into the CD-ROMdrive.2 Click [Exit] to close the Choose Setup Language dialog box whenthe installer automatically starts.3 Open “Admin\e-FilingUtility” folder and double-click “setup.exe”.y The Choose Setup Language dialog box appears.