CX2032 MFP Userís Guide Installing upgrades136Adjusting windows printer driversOnce your new upgrade has been installed, you may need to update theWindows printer driver so that the additional features are available toyour Windows applications.Remember that if your MFP is shared between users on differentcomputers, the driver must be adjusted on each userís machine.The illustrations shown here are for Windows XP. Other Windowsversions may appear slightly different, but the principles are the same.PCL driverIf you have installed a memory upgrade it is not necessary to change thePCL printer driver, and you can ignore this section.If you have installed a duplex unit or hard disk, proceed as follows:PCL DevOption (288).bmp1. Open the Printers window (calledìPrinters and Faxesî in Windows XP) viathe Start Menu or from the WindowsControl Panel.2. Right-click the printer icon for thisprinter, and choose Properties from thepop-up menu.3. On the Device Options tab, check thebox for the upgrade you have justinstalled.4. Click OK to close the properties window, and then close thePrinters window.Postscript driverThis driver must be adjusted for any upgrade just installed.PS DevSettings Tab.eps1. Open the Printers window (calledìPrinters and Faxesî in Windows XP)via the Start Menu or from theWindows Control Panel.2. Right-click the printer icon for thisprinter, and choose Properties fromthe pop-up menu.3. On the Device Settings tab, locate thelist of installable options. Change
