CX2032 MFP Userís Guide A guide to printing199Booklet printing (imposition)Booklet printing in the Windows drivers printing allows printing of multi-page documents with their pages ordered and arranged so that finalprinted output can be folded into a booklet. Typically, A4/Legal pageswould be reduced to A5/Letter and printed side by side on both sides ofA4/Letter paper, so that the paper can be folded into a booklet.Since this feature prints on both sides of the page, it requires a duplexunit to be installed in the MFP, and at least 256MB of additional memory(512MB in total).When using the PostScript driver, if you plan to print a long document,more than about 16 pages, consider printing it in sections of 8 or 16 ata time. This is called the ìsignature,î and will avoid having too thick astack of paper to fold to make your booklet. Your document will then beprinted in a series of booklets which can be stacked one above the other.This is usually a neater arrangement.The above considerations do not matter when using the PCL driver asthe signature can be set within the driver, and a long document can beprinted directly as a series of booklets.Note that the number of pages in a booklet is always a multiple of four,since two pages are printed on each side of each sheet of paper. If yourdocument is not a multiple of four pages long, the last one, two or threepages in your folded booklet will be blank.NOTES1. To find out how much memory currently installed, printout a menu map from the control panel.2. A few applications do not support booklet printing, butmost do.
