4 EDITING FUNCTIONSSheet Insertion 113Sheet InsertionYou can insert a special type of paper such as colored paper at the desired page. This function is called “sheet insertion”.You can insert up to 2 types of sheets for a total of 50 pages. The sheet insertion mode has the following 2 types:COPIED: Inserts a copied sheet, replacing the specified page.BLANK: Inserts a blank sheet before the specified page.1 Place sheets for sheet insertion.Place them on the bypass tray or in a drawer previously set for insertion sheets. The paper for the insertion sheetsmust be placed in a different paper source than normal paper. When placing paper in a drawer for sheet insertion, be sure to select “INSERT 1” or “INSERT 2” as a papertype, and also set the paper size and thickness. P.17 “Setting paper type” When placing paper on the bypass tray, be sure to set the paper size and thickness. P.36 “Bypass Copying” Place the paper for insertion sheets of the same size as normal paper in the same direction.2 Place the normal paper in the drawer(s).3 Place the original(s).When placing them on the original glass, they must be placed from the first page.4 Press [SHEET INSERTION] on the EDIT menu.REPORT200312344REPORT200323 13 2 1
