2.HOW TO MAKE COPIESMaking Copies 312 HOW TO MAKE COPIES Scanning the next original during copyingEven if copying is in progress or “READY (WARMING UP)” is displayed on the touch panel, you can scan the next original(auto job start).1 Place the original(s).2 Set the number of copy sets and the copy modes as required.The new job starts in the copy modes that you previously selected unless you select other modes.3 Press the [START] button on the control panel.A maximum of 1000 sheets can be scanned per 1 copy job or upuntil the embedded memory becomes full.Confirming auto jobsYou can confirm which jobs are in waiting on the touch panel or cancel them as required. For details, see the followingpage: P.172 “Confirming Copy Job Status”Canceling jobs being scannedPress the [STOP] button on the control panel to stop a job while originals arebeing scanned.When you press [JOB CANCEL] on the touch panel or the [FUNCTIONCLEAR] button on the control panel while the scanning is being paused, thescanning will end. (In this case, the data which were scanned before the jobwas paused will be copied.) To restart the scanning, press the [START]button.
