2 BASIC OPERATION38 Viewing the Scan Job Status and Log Viewing the scan job logA record of scan jobs can be displayed on the [LOG] tab of the JOB STATUS screen. To display the record on the touchpanel, press [JOB STATUS] > [LOG] > [SCAN].On the [LOG] tab, you can view each job’s destination/file name, agent (scan function), date and time, number of pages,and status (job result).Up to 1000 jobs can be listed. To display the previous or next page, press or . The number of jobs displayed on apage varies depending on the equipment used.If you want to register an e-mail address on the list to the address book, press [ENTRY]. P.109 “Saving contact information to the address book”To exit from the SCAN LOG screen, press [CLOSE]. For details of the job record displayed on the [LOG] tab, refer to the TopAccess Guide. For details on error codes displayed in the “Status” column, refer to the Troubleshooting Guide. The scan job log can be exported to a USB storage device. For details, refer to the MFP Management Guide.
