Oki LP-1040 Installation Manual

Also see for Teriostar LP-1040 Series: User manual Quick reference guide Maintenance manual

OKI Data Infotech Corporation CONFIDENTIAL1-1Chapter 1 Installation procedure overview1.1 Procedure and required personnelTable 1-1 shows the procedures and number of persons/people/workers required to install thePrinter.Table 1-1 Installation procedure overviewNo. Procedure Description Personnel Reference1 Transfer to the unpackinglocationTransfer the packed box to theunpacking location.2* Section 3.12 Unpack Remove the printer and the accessoriesfrom the box. Check the contentsreferring to the packing list.2 Section 3.23 Move to the installationlocationAfter removing the Printer from the box,move it to the installation location.2* Section 3.34 Install Install the Printer, set the parts andaccessories, and then connect thepower cable.1 Section 3.45 Set parameters Set the parameters for printing andcommunication.1 Chapter 46 Confirm the Printeroperation without connectingto a computerCheck the print quality in themaintenance mode.1 Chapter 57 Connect the interface cable Connect the interface cable. 1 Chapter 68 Confirm the operation of thewhole systemConnect to the host computer, and thencheck the overall operation of the entiresystem. If operation is normal, thehardware installation procedure iscomplete.1 Chapter 79 Hand over Explain the basic operation proceduresof the Printer to the user.1 Chapter 8Note:Generally transfer or relocate the Printer with a forklift or dolly. So check the transfer route for the forklift or dollyin advance.If you need to carry the Printer without a forklift or dolly, ensure that the required four to sixpeople/workers/persons are available, as the Basic Printer Model weighs approximately 185kg (6525.69oz),and the Multifunction Model Printer approximately 205 kg (7231.17oz).