Oki LP-1040 Installation Manual

Also see for Teriostar LP-1040 Series: User manual Quick reference guide Maintenance manual

OKI Data Infotech Corporation CONFIDENTIALChapter 3 Receive the shipment and set up the Printer in the final position3-213.4.9 Attach the document table (Multifunction Printer Model only)1 Required tools2 Remove the document table fromthe box.Phillips screwdriver (#2) x1- Between 150 mm (5.91 inches) and210 mm (8.27 inches) in length(180 mm (7.09 inches)recommended)- Magnetic210 mm(8.27 inches)Two brackets are installed on the document table(one on each side) when the Printer is supplied.They are used to keep the document table at theright angle.After the document table has been installed, thesebrackets should be removed as they are notrequired anymore. However, do not dispose ofthem as they may be used the next time you movethe Printer.The following seven screws are supplied with the documenttable.- Five hexagon plus socket head TP machine screws- Two plus socket head machine screws