Oki LP-1040 Installation Manual
Also see for Teriostar LP-1040 Series: User manualQuick reference guideMaintenance manual
                                                                                           |
OKI Data Infotech Corporation CONFIDENTIALChapter 3 Receive the shipment and set up the Printer in the final position3-173 Loosen the two screws for each of the rightand left fixing metal plates.Then slide them outward.4 Tighten the two screws loosened above foreach metal plates.5 Remove the two metal plates and two screwseach (total of four) at the printer rear's rightand left as the photo shows.6 Remove the screws fixing the developer unit.(Right and left) (Upper side: two screws)7 With two screws each (total of four), return the right and left metal plates, removed inStep 5, to their original positions.8 With four screws install the cover removed in Step 2 to its original position.Fixing metal plates |
Related manuals for Oki Teriostar LP-1040 Series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine