132TSetup Items in PDL Setting MenuLP-2050/LP-2050-MF User's Manual for Basic Printer OperationPen Parameters (only with HP-GL and D-SCAN)Pen parameters specify the Printer's drawing pen conditions, e.g., thickness (linewidth), and density.HP-GL:00 to 15D-SCAN:01 to 32nPen SettingszPen Parameter ModeThe parameter selects the data setting or touchpanel setting tospecify the penattribute.n: Default valuenData SettingEnables the data setting for the pen attributes.Panel SettingEnables the touchpanel setting for the pen attributes.zFine Pen-Width AdjustmentThe parameter adjusts the pen width value. The pen width specified with data ortouchpanel setting is increased or decreased by the adjustment value.Note that the maximum pen width is 16 mm (0.63 inches), and the minimum is 1 dot.-0.99 to +0.99Default value = 0zMicro-Vector RoundingThe parameter specifies the shape of the micro-vector's line ends and line joins.n: Default valuenOffLine end is specified by the Line End parameter, and Linejoin is specified by the Line Join parameter.OnPerforms rounding for all micro-vectors.zWith the Printer, micro-vector is defined as follows:- The line width and line length are 1 mm or less.Before UseBasic OperationsMenu FunctionsAuthenticationfunctionTroubleshootingAppendixChapterChapterChapterChapterChapter12345
