136TSetup Items in PDL Setting MenuLP-2050/LP-2050-MF User's Manual for Basic Printer OperationRaster ParametersRaster parameters specify the condition to draw raster data.nBinary Image ScaleSets the scaling mode when scaling binary image data.n: Default valuePhoto ModeMaintains the density when scaling binary image data.(Performs simple sampling.)nLine Art ModeMaintains the lines when scaling binary image data.nScreening (only with HP-GL and D-SCAN)The parameter specifies the screening method for multi-valued image.n: Default valuenLine Art ModeFor multi-valued image data, performs screening suitablefor line art.Graphic ModeFor multi-valued image data, performs screening suitablefor computer graphics.Photo ModeFor multi-valued image data, performs screening suitablefor photos. Some processing time is required for Line ArtMode and Graphic Mode.nUniformity effectsThis setting can be used only whenGraphic Modeis selected in theScreeningsetting.This setting further reduces density unevenness in case density unevenness in thelow-density parts appears in spite of theGraphic Modeselected for theScreeningsetting.n: Default valuenStandardUniformity processing is not performed.Better uniformityUniformity processing is performed. (Print quality is lessthan withStandard.)High uniformityUniformity processing is performed. (Print quality is lessthan withBetter uniformity.)Before UseBasic OperationsMenu FunctionsAuthenticationfunctionTroubleshootingAppendixChapterChapterChapterChapterChapter12345