86LP-2050/LP-2050-MF User's Manual for Basic Printer OperationPrinter Engine MenuThe Printer Engine menu specifies the operation conditions for the Printer engine.Power Save TimeThe parameter specifies the maximum idle time before entering the power savemode.n: Default value15 minutesEnters power save mode if the Printer is not operated for15 minutes.30 minutesEnters power save mode if the Printer is not operated for30 minutes.n60 minutesEnters power save mode if the Printer is not operated for60 minutes.90 minutesEnters power save mode if the Printer is not operated for90 minutes.235 minutesEnters power save mode if the Printer is not operated for235 minutes.zAfter printing is completed, the Printer enters power save mode automatically whenthe data waiting status reaches the set time.zThe power save mode is canceled automatically when the Printer receives the data.zThe power save mode is canceled automatically when the Printer is accessed with abrowser or SNMP manager.zTo cancel the power save mode, press POWER SAVE while the Printer is in the powersave mode.Top Cut Timer (Roll 1 to 4)Sets the data waiting time after which the end of the roll paper is cut automatically.This is performed when data is received for printing after the data waiting statushas continued for a while.Before UseBasic OperationsMenu FunctionsAuthenticationfunctionTroubleshootingAppendixChapterChapterChapterChapterChapter12345