Oki MB280 MFP User Manual

Also see for MB280 MFP: Configuration guide Wireless USB Installation Safety and regulatory information Guía del usuario Guide de l'utilisateur

Contents

Oki MB280 MFP User Manual Manual pdf 34 page image

MB280- 34 -Parameters/Setup!252 - SETUP / TEL. NETWORK / PREFIX1 Press !, enter 252 using the keypad.2 Enter the required minimal SIZE NUMBER of thecompany’s outside numbers and confirm with OK.The minimal size will range between 1 and 30.3 Enter the required outgoing local PREFIX of thecompany’s telephone network (maximum 10characters) and confirm with OK.4 To exit this menu, press .Transmission reportYou may print a transmission report for allcommunications over the telephone network (PSTN).You may choose between more than one criteria forprinting reports:• ON: a report is given when the transmission wasproperly performed or when it is completelyabandoned (but there is only one report per request),• OFF: no transmission report, however, your fax willnote all transmissions that took place in its log,• ALWAYS: a report is printed with each transmission,• ON ERROR: a report is printed only if the transmissionfailed or is abandoned.With each transmission report from memory, a reducedversion of the first page is automatically reproduced.To select the report type:!231 - SETUP / SEND / SEND REPORT1 Press !, enter 231 using the keypad.2 Select the required option ON, OFF, ALWAYS orON ERROR and confirm your choice with OK.3 To exit this menu, press .Document feed typeYou may choose the way you want to feed yourdocuments:• from memory, transmission will take place only aftermemory storage of the document and dialling.It allows you to get your originals back quickly to freeup the machine.• from the feeder of the sheet-feed scanner,transmission will occur after dialling and paperscanning. It allows transmission of larger documents.To select the way you want to feed your documents:!232 - SETUP / SEND / MEMORY SEND.1 Press !, enter 232 using the keypad.2 Select the option MEMORY or FEEDER andconfirm your choice with OK.In feeder mode, reduced images will not appear onthe transmission report.3 To exit this menu, press .Economy periodThis function allows you to defer a fax transmission to "off-peak hours" and thus reduce the cost of yourcommunications.The economy period, via the telephone network (at off-peak hours), is preset by default from 7.00 pm to 7.30 am.Nevertheless you may change this time slot.To modify the economy period:!233 - SETUP / SEND / ECO PER.1 Press !, enter 233 using the keypad.2 Enter the hours of the new economy period (forexample 19:00-07:30) and confirm your choicewith OK.3 To exit this menu, press .To use the economy period:!32 - FAX / ECO TRANS.1 Select !32 - FAX / ECO TRANS.2 Enter the call number and confirm with OK.3 Adjust the contrast and confirm with OK.4 Select the feed type, FEEDER or MEMORY andconfirm with OK.5 You may enter the number of pages beforetransmission and confirm with OK.6 If you are using the flatbed scanner, you can scanmore than one page. Place the next page on thescanner, select NEXT and confirm with OK. SelectDONE when all pages have been scanned.ImportantIf you define a local prefix, do notadd it to the numbers stored inthe directory, it will beautomatically dialled with eachnumber.NoteTo insert a pause for dial tone ("/" sign),press simultaneously the C TRL and Mkeys, or long press the 0 (zero) key onthe numerical keypad until the "/" signis displayed.