128 Using the ScannerScanning With the MachineThe machine keys can be used to make scans. This operation differs from scan-ning from a computer application since the destination of the scan data can alsobe specified." Before scanning, check that the Scan key is lit up in green. If the key isnot lit up in green, press the Scan key to enter Scan mode." If, while specifying settings, no key is pressed for the length of time speci-fied for AUTO PANEL RESET, the entered settings are canceled and themain screen (Scan mode) is displayed.Basic Scanning Operation1 Position the document to bescanned." For details on positioning thedocument, refer to “Placing adocument on the originalglass” on page 98 and“Loading a document intothe ADF” on page 99.2 Press the Scan key to enter Scan mode.
