137 Using the Scanner" To search registered names, select NAME. To search e-mailaddresses, select E-MAIL.4 Use the keypad to type in the search keyword (maximum of 10 characters),and then press the Enter key.The search begins, and the search results appear after a while. If no datamatches the search keyword, NOT FOUND appears for about two seconds." For details on entering/editing text, refer to “Entering Text” onpage 265." Text starting with the first character of the maximum 10 characters issearched for. Text will not be found if the search keyword is in the mid-dle of a word.5 Press the up arrow or down arrow key to select the desired data, and thenpress the Enter key." To check the found information, press the key." An e-mail address exceeding 64 characters cannot be specified. Ifsuch an e-mail address is specified, ADDRESS IS TOO LONGappears for about two seconds, and then the screen for specifying thedestination address appears." To narrow down the search results, press the Back key, and then per-form step 4 again.6 Press the Enter key again.7 Press the up arrow or down arrow key to select FINISH, and then press theEnter key." To add an additional e-mail address, select ADD in step 7, and thenspecify the destination.To edit the specified e-mail address, select CHECK/EDIT in step 7,and then continue with step 2 of “Editing a Specified DestinationAddress”.To delete a specified e-mail address, select CHECK/EDIT in step 7,and then continue with step 2 of “Deleting a Specified DestinationAddress”. The address cannot be edited.Specifying Multiple Destination AddressesA destination address can be added if a destination e-mail address is specified." If an FTP address or an SMB address was selected, multiple destinationaddresses cannot be specified.
