145 Using the ScannerEditing/Deleting Group Dial DestinationsInformation registered with a group dial destination can be edited or deleted.1 In the main screen (Scan mode), press the up or down arrow key to selectUTILITY, and then press the Enter key.2 Press the up or down arrow key to select DIAL REGISTER, and then pressthe Enter key.3 Press the up or down arrow key to select GROUP DIAL, and then press theEnter key.4 Use the keypad to type in the number (between 1 and 20) for the group dialdestination to be edited/deleted, and then press the Enter key.The information currently registered for the group dial destination appears forabout two seconds.5 Press the up or down arrow key to select EDIT to edit information or DELETEto delete the destination, and then press the Enter key.If DELETE was selected, the settings are deleted, and the DIAL REGISTERmenu appears again.6 If desired, edit the group name, and then press the Enter key." For details on entering/editing text, refer to “Entering Text” onpage 265.7 Press the up or down arrow key to select ADD to add a speed dial destina-tion, CHECK/EDIT to delete the destination or FINISH to finish editing, andthen press the Enter key.If FINISH was selected, the edited settings are saved, and the DIAL REGIS-TER menu appears again. If ADD was selected, continue with step 6 of “Reg-istering Group Dial Destinations” on page 144. If CHECK/EDIT was selected,continue with step 8.8 Press the up or down arrow key to select the speed dial destination to bedeleted, and then press the Stop/Reset key." To check the settings for the selected speed dial destination, press theEnter key.9 Press the up or down arrow key to select Yes, and then press the Enter key.10 After the speed dial destination is deleted, press the Back key.11 To delete another speed dial destination, repeat the procedure from step 8.12 To finish deleting speed dial destinations, press the up or down arrow key toselect FINISH, and then press the Enter key.
