80 Media HandlingDO NOT use thick stock that is Mixed with any other media in the trays (as this will cause media missfeed-ing)LabelA sheet of labels consists of a face sheet (the printing surface), adhesive, and acarrier sheet: The face sheet must follow the plain paper specification. The face sheet surface must cover the entire carrier sheet, and no adhesiveshould come through on the surface.You can print continuously with label sheets. However, this could affect the mediafeed, depending on the media quality and printing environment. If problemsoccur, stop the continuous printing and print one sheet at a time.Try printing your data on a sheet of plain paper first to check placement. Checkyour application documentation for more information on printing labels.Use label sheets that are Recommended for laser printingDO NOT use label sheets that Have labels that easily peel off or have parts of the label already removed Have backing sheets that have peeled away or have exposed adhesive" Labels may stick to the fuser, causing them to peel off and media mis-feeds to occur.Capacity Tray 1 Up to 50 sheets, depending on their thick-nessTray 2 Not supportedOrientation Face upDriverMedia TypeLabelsDuplexing Not supported
