130 Using the ScannerSpecifying the Data LocationSelect whether the computer or USB memory device is the location where scandata is to be saved. When transmitting via a network, refer to “Specifying theDestination Address (Scan to E-mail/FTP/SMB)” on page 132." If an address has been specified as the destination for the data, SCANTO PC and SCAN TO USB MEMORY cannot be selected.Saving Data on a Computer Connected (Scan to PC)In order to perform Scan to PC operations, the following requirements must bemet.z This machine is connected to a computer using a USB cable.z The TWAIN scanner driver, the printer driver and Scanner Utility (Win-dows only) are installed on the computer.z Either the Scanner Utility is activated or the Scanner Utility icon appearsin the Windows notification area.z The document is positioned at the location specified with Paper Source(Flatbed (original glass) or ADF) in the Scanner Utility." For details on the Scanner Utility, refer to the online help.Follow the procedure described below to send scan data to a computer con-nected to this machine." The scan settings specified with the Scanner Utility are given priority.1 In the main screen (Scan mode), press the up or down arrow key to selectSCAN TO, and then press the Enter key.2 Press the up or down arrow key to select SCAN TO PC, and then press theEnter key." The scan data is saved in the folder specified with the Scanner Utility.
