Getting started > 24A UTO POWER OFFWhen your machine is not used for a certain period of time, it turns off the powerautomatically. Once the machine turns off the power, you need to turn on to use it.The machine has three settings to select the machine's behavior on Auto Power Off.> Enable> Auto Config> DisableEnable:When your machine is not used for a certain period of time, it turns off the powerautomatically.Auto Config:The machine will not turn off the power automatically under the conditions listed below.> An Ethernet cable is plugged to network interface connection> A telephone cable is plugged to LINE connectionDisable:The Auto Power Off function is disabled. The machine will not turn off the powerautomatically.By factory default, the time interval to turn off the power is set to 4 hours. You can changethe time interval by pressing the SETTING key on the operator panel and then selectingAdmin Setup > Management > Power Save > Auto Power Off Time.By factory default, Auto Power Off is set to Auto Config or Disable. You can change thesetting by pressing the SETTING key on the operator panel and then selecting AdminSetup > User Install > Power Save > Auto Power Off.NOTEIn the following cases, the Auto Power Off function is also disabled.> When an error occurs> When time-set transmission is scheduled> When the fax transmission is waiting for a redial
