Paper recommendations > 34M ULTI PURPOSE TRAYThe multi purpose tray can handle the same sizes as the cassette trays but in weights upto 220 g/m². For very heavy paper stock use the face up (rear) paper stacker. This ensuresthat the paper path through the printer is almost straight.The multi purpose tray can feed paper widths from 76mm to 215.9mm and lengths from127.0mm to 1320mm (banner printing).For paper lengths exceeding 356mm (Legal 14in.) use paper stock between 90g/m² and128g/m² and the face up (rear) paper stacker.Use the multi purpose tray for printing on envelopes. Up to 10 envelopes can be loaded atone time, subject to a maximum stacking depth of 10mm.FACE DOWN STACKERThe face down stacker on the top of the printer can hold up to 150 sheets of 80g/m²standard paper, and can handle paper stocks up to 176g/m².Pages printed in reading order (page 1 first) will be sorted in reading order (last page ontop, facing down).FACE UP STACKERThe face up stacker at the rear of the printer should be opened and the tray extensionpulled out when required for use. In this condition paper will exit via this path, regardlessof driver settings.The face up stacker can hold up to 100 sheets of 80g/m² standard paper, and can handlestocks up to 220 g/m².Always use this stacker and the multi purpose feeder for paper stocks heavier than176g/m².D UPLEXAutomatic two-sided printing on the same range of paper sizes as tray 2 (i.e. all cassettesizes except A6), using paper stocks from 64 - 176g/m².NOTEThe face up stacker cannot be used when printing duplex.
