- 111 -7. FaxSetting for ReceptionsThis section describes various settings when receiving a fax.• Setting the Reception Mode• DRD• Setting the Waiting Time from When an Incoming Call Arrives to When Reception Starts(Response Waiting Time)[Fax Ready Mode] is set by factory default.Change the setting according to your environment.• [Fax Ready Mode] : Select this mode if you use this machine for fax only.• [Tel/Fax Ready Mode] : Select this mode if you want to receive both phone calls and faxeswith the machine detecting automatically.• [Ans/Fax Ready Mode] : Select this mode if you want to use the answering phone functionof an external telephone as well as the fax function of the machine.• [Tel Ready Mode] : Select this mode if you often use the external telephone that isconnected to the machine.• [DRD] : If you use the distinctive ring detection (DRD) function that is provided by atelephone company. Refer to "DRD".1 Check that the machine is turned on.2 Press the (SETTING) button on the operator panel.3 Press the button to select [Admin Setup] and press the (OK) button.4 Enter the administrator password.Setting the Reception Mode
