- 37 -2. Setting UpA USB cable (Hi-Speed USB 2.0) is not supplied.1 Prepare a USB cable.If you want to connect in USB 2.0 Hi-Speed mode, use a Hi-Speed USB 2.0 USB cable.2 Check that the machine and computer are turned off.3 Open the interface cover on the back side of the machine pressing the centerpart of it.4 Insert one end of the USB cable into the USB interface connector on themachine.Do not insert the USB cable into the network interface connector. It may cause a malfunction.5 Pass the USB cable under the tab, and then close the interface cover.6 Insert the other end of the USB cable into the USB interface connector on thecomputer.Connecting a USB Cable
