Oki MICROLINE 385/6 Handbook

Character WidthPitch Double width Compressed*(Ep;10 CPI 5 CPI 17.1 CPI12 CPI 6 CPI 20 CPI15 CPI 7.5 CPI Cannot be compre:17.1 CPI 8.5 CPI Cannot be compre:20 CPI 10 CPI Cannot be compre:Proportional Proportional double Proportional conde* These compressed width values apply to the Epson emulation only. In IBM emulations, theproduces 17.1 CPI and ESC SI produces 20 CPI regardless of initial pitch.Proportional Spacing Decimal Hexa-decimal ASCII СProportional Spacing 27112 1 1B 70 n ESC p n En = 1: Begin proportional spacing n = 0: End proportional spacingProportional Spacing 27 80 n 1B 50 n ESC P n Pn = 1: Begin proportional spacing n = 0: End proportional spacingProportional spacing adjusts the space between letters to compensate for twidths of individual characters. Unlike fixed spacing, where all characters are fora matrix of uniform width at a specified pitch, proportional spacing gives morespace to wide characters, such as w or M, and less to narrow characters, such aprinted result is more attractive and easier to read than fixed-space printing.Because the characters have different widths, proportionally spaced fonts ha>pitch. Therefore, margin settings are only approximate unless your softwaresupports proportional spacing. Proportional spacing is available only with Let(LQ) printing. You can also select proportional spacing in Menu Select modeprinter's control panel. In addition, proportional spacing is one of the feature:through the print mode combination commands in all the emulations.Double Width Decimal Hexa-decimal ASCII СDouble width printingor27 87 n28 69 n1В 57 n1С 45 nESC WnFS E nEEn = 1: Begin double width printing n = 0: End Double width printingBegin one-line dble width printingBegin one-line dble width printingEnd one-line dble width printing1427 14200E1B 0E14SOESC SODC4EEE1-4