Oki MPS4200mb Safety Information Manual

Also see for MPS4200mb: Material safety data sheet User manual Basic user manual Maintenance manual User manual

Contents

7 - EnglishTo comply with this law, you must enter the followinginformation in your fax unit:• Date and time: see “Changing the Date and Time”under Setting Your Terminal in the User’s Guide forinstructions on doing this.Name and telephone number which identify thesource of your fax transmission: see Your fax number/your name under Setting Your Terminal in the User’sGuide for instructions on doing this.FCC Radio Frequency Interference StatementWARNING: This equipment has been tested and found tocomply with the limits for a Class B digital device, pursuantto Part 15 of the FCC rules. These limits are designed toprovide reasonable protection against harmful interferencein a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, maycause harmful interference to radio communications.However, there is no guarantee that interference will notoccur in a particular installation. If this equipment doescause harmful interference to radio or television reception,which can be determined by turning the equipment off andon, the user is encouraged to try to correct theinterference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and thereceiver.• Plug the unit into an outlet on a circuit different fromthat to which the receiver is connected.• Consult the dealer or an experienced radio/televisiontechnician for help.Note: It is the responsibility of the user to obtain therequired shielded cable in order to ensurecompliance of this equipment with FCC regulations.Changes or modifications not expressly approved by OkiData may void your authority to operate this device.FCC Radio Frequency Interference Statementwhen the FDI option is installedWARNING: This equipment has been tested and found tocomply with the limits for a Class A digital device, pursuantto Part 15 of the FCC rules. These limits are designed toprovide reasonable protection against harmful interferencein a commercial environment. This equipment generates,uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, maycause harmful interference to radio communications.Operation of this equipment in a residential area is likely tocause harmful interference in which case the user will berequired to correct the interference at their own expense.Note: It is the responsibility of the user to obtain therequired shielded cable in order to ensurecompliance of this equipment with FCC regulations.Changes or modifications not expressly approved by OkiData may void your authority to operate this device.California RequirementPerchlorate Warning Applicable to Lithium BatteriesSold and/or Distributed in CaliforniaPerchlorate Material: special handling may apply.See www.dtsc.ca.gov/hazardouswaste/perchlorate.Industry Canada (IC) Radio InterferenceStatementsThis Oki Data apparatus complies with the Class B limitsfor radio interference as specified in the IC RadioInterference Regulations.With FDI option installed.This Oki Data apparatus complies with the Class A limitsfor radio interference as specified in the IC RadioInterference Regulations.Industry Canada (IC) Requirements forEnd UsersThis product meets the applicable Industry Canadatechnical specifications.The Ringer Equivalence Number is an indication of themaximum number of devices allowed to be connected to atelephone interface. The termination on an interface mayconsist of any combination of devices subject only to therequirement that the sum of the RENs of all the devicesdoes not exceed five.European Union Council of the EuropeanCommunities Statements of Conformancefor 220/240-Volt ModelsElectromagnetic ConformanceThis product complies with the requirements of the CouncilDirective 89/336/EEC on the approximation of the laws ofthe member states relating to electromagneticcompatibility.Safety ConformanceThis product is in conformity with Directive 73/23/EEC onthe harmonization of the laws of Member States relating toelectrical equipment designed for use within certainvoltage limits.