%2.2.07 Support Protector Mechanism2.2.07 Support Protector MechanismDuring printer initialization, the support protector is latched in the stored position (approximately 5 mmfrom the left bracket of the main frame).Just before paper is loaded, the printhead moves towards the left bracket and unlatches the supportprotector.As the printhead moves to the right, the support protector reset spring pushes the support protectortoward the center of the platen. With the support protector in this position, the ribbon protector and thesupport protector prevent the leading edge of the paper from curling or folding.Once the paper is ejected, the printhead slowly moves towards the left bracket. The support protector islatched in the stored position when it is pushed to approximately 5 mm from the left bracket.ML520/521 ( 96-02-04 )
