%2.2.09 Paper Park2.2.09 Paper ParkIf continuous feed paper is installed and printing on cut sheet paper is desired, it is not necessary tounload the continuous feed paper. The Paper Park feature provides a means of retracting the continuousfeed paper from the paper path, while (at the same time) cut sheet paper is fed.Paper Park OperationPlace the change lever in the REAR FEED or BOTTOM FEED position.Press the PARK switch on the operation panel.A reverse line feed operation retracts the paper until paper-end occurs or 19 inches of paper have beenretracted.NOTE:Retracting 19 inches of paper without detecting a paper-end condition causes the line feed operation tostop. The line feed operation stops because the printer assumes a jam has occurred.The operator can press the SEL switch to reset the ALARM LED and press the PARK switch to continuethe park operation.This operation may be useful when length of the paper to be parked is greater than 19 inches.ML520/521 ( 96-02-04 )
