%2.2.08 Automatic Paper Load2.2.08 Automatic Paper LoadThe Microline 520/521 printers will automatically detect cut sheet paper and feed the paper to the Top ofForm (TOF) position.Cut Sheet PaperSet the change lever to the TOP FEED position.NOTE:When the change lever is in the TOP FEED position, the cut sheet detection lever contacts the cut sheetdetection switch (BASW), which is located on the main control board.Insert the sheet of paper between the platen and the paper chute.Once paper is detected at the paper end sensor and the amount of time selected on theWait Timesetting of the menu has lapsed, the line feed motor will feed the paper until the leading edge of the paperreaches the top of form position.ML520/521 ( 96-02-04 )
