%3.2.13 Space Rack3.2.13 Space Rack1. Perform these procedures: 3.2.01, 3.2.02, 3.2.04, 3.2.10, and 3.2.11.2. Remove the spring (1).3. Disengage the claws (2) on the both ends of the space rack (3).4. Pull the space rack straight up and remove it.NOTE:InstallationAfter installing the space rack, check the printhead gap adjustment. Refer to Section 3.3 of thisService Handbook.CleaningWhen cleaning, refer to Section 3.4 of this Service Handbook.CAUTIONDo NOT lubricate the space rack. Lubricating the space rack will attract dust. If enough dustaccumulates on the space rack, printing problems will occur.P/N 50923501 Spring: Tension (Space Rack) RSPL Both B.2.04P/N 53563301 Rack: Space (Narrow) RSPL 520 B.2.04P/N 53563401 Rack: Space (Wide) RSPL 521 B.2.04ML520/521 ( 96-02-04 )
