Oki OF5650 User Manual

Also see for OF5650: User guide Safety and Warranty Guide Options guide Software update

Contents

Oki OF5650 User Manual Manual pdf 7 page image

7The User InterfaceThis is the part of Unimessage Pro you use. One of its tasks is to enable you tosend messages directly from any Windows application by printing to theUnimessage Pro printer. Unimessage Pro will convert this printed output into thecorrect format: fax or email, depending on the requirements of the person(s) youare sending it to.It allows you to see the various job queues and lists that make up UnimessagePro and it allows you to create and view messages as well as selecting variousprogram optionsOn networks the user interface runs on each workstation that wants to send orreceive messages.Installation and ConfigurationInstallation and device configurationSystem RequirementsBefore you install Unimessage Pro you should make sure that you have an IBM-compatible PC running Windows 95, 98, NT4 or above. The following minimumspecification is recommended: Pentium 120MHz, 16 MB RAM when running Windows 95 or 98 FirstEdition.Microsoft Windows 95 OSR1 Service Pack 1 is recommended. Pentium 120MHz, 32 MB RAM when running Windows NT4 or 98 SecondEdition.When using Windows NT4 please ensure that Microsoft NT4 Service Pack4 or later is installed. Pentium 133MHz, 64 MB RAM when running Windows 2000 Professional– 128 MB Ram recommended.A 24-Bit color video card and driver is recommended.Please note that though Unimessage Pro will operate on the above specificationPC this is a minimum. As with most Windows applications, Unimessage Pro willrun faster when used on a PC with a faster processor or with more RAM. If youare using other applications on your PC at the same time as Unimessage Pro, afaster processor and additional RAM are highly recommended.