Receiving Faxes in MemoryReceiving Faxes in MemoryYour fax machine will automatically receive messages into memory (and not immediately print them) in afew different situations.No Paper ReceptionWhen your fax machine has run out of paper, a NO PAPER, REPLACE PAPER message willappear on the display. Even when your fax machine runs out of paper, it will continue to receivefaxes in memory.1 Your fax machine will automatically print out any messages received in memory when the paper isreplaced.No Toner ReceptionWhen your fax machine is running low on toner, it will display a TONER LOW, REPLACE TONERmessage, and will receive faxes into memory (rather than risk printing an unreadable message).If your fax machine has received a message in memory because toner is low, MSG. INMEMORY will appear on the display.To print out a message stored in memory when toner is running low, use the following instructions.1 Press the Select Function key.2 Press the 10/Message Print From Memory One Touch key. The display will show 1:SUBST.MESSAGE PRINT.3 Press the Yes < key. The stored message will begin printing.Tip:Even if you see a TONER LOW message on your fax machine, you may be able to use the10/Message Print From Memory One Touch key to continue printing faxes, but the print qualitycannot be guaranteed. Replace your toner cartridge as soon as possible.Cancelling Messages Stored in MemoryIt is also possible to erase messages received in memory without printing them.1 After you have followed the instructions to print out messages stored in memory, the display willshow MSG. IN MEMORY, PRINTING.2 To erase the message instead of printing it, press the Stop key. The display will show CANCEL?3 Press the Yes < key to erase the message from your fax machines memory.OF1050 Users Guide(96-01-30)