Initiating a Relay BroadcastInitiating a Relay Broadcast1 Load your documents. Set resolution and contrast if needed.2 Press the Select Function key.3 Press the 4/Relay Initiate TX One Touch key. The display will show RELAY PASSWORD.4 Press the No > key.5 Using the numeric keypad, enter a 4-digit password which is the same as the relay keywordprogrammed into the relay key station.6 Press the Yes < key. The display will show REMOTE LIST NO.7 Press the No > key.8 Using the numeric keypad, enter a 2-digit number which corresponds to a relay groupprogrammed into the relay key station.9 Press the Yes < key. The display will show SELECT LOCATION.10 Select the location of the relay key station. Refer to the instructions below.11 Press the Start key. Your fax machine will begin sending the fax.OF1050 Users Guide(96-01-30)
