English68Memory full saveWith features like group dialling, “call origination” starts after an entiredocument or set of documents is read into memory. If a documentmemory overflow occurs the display will prompt whether the documentsalready scanned in memory should be sent or deleted. The user then hasthe choice of which option is appropriate. If the user makes no responseafter a short time period then the documents will be automatically sent ifthis function is defaulted to ON, or deleted if the default is set to OFF.Available settings are ON and OFF. Speed access No. 17.Instant dialIn the ON state, the document is scanned into memory and dialling startsimmediately. Although the function relies on memory availability,connection to the remote location is confirmed and the document is trans-mitted faster when memory is available. If it is set to OFF, the machinefirst confirms contact with the remote location and then transmits thedocument reading from the document tray (without scanning intomemory). Speed access No. 18.Restrict accessThis function controls whether or not machine operation is restricted ornot. In the ON state, if RESTRICTION ID has been programmed, usersmust enter a password before being allowed access to the machine’s func-tions. Set to OFF, no password is required even if RESTRICTION ID hasbeen programmed. Speed access No. 19.ECM functionThe error correction mode (ECM) function is provided to improvecommunications in areas where telephone line conditions are very poor.Available settings are ON and OFF. Speed access No. 20.Sender ID (ON/OFF)This function determines whether the Sender ID is to be printed on thetransmitted fax at the remote site. Available settings are ON and OFF: setto ON, the ID is included on the fax. Speed access No. 23.5750GB.book Page 68 Tuesday, June 6, 2000 8:08 PM
