EnglishChapter 6 - Customising 71“PASSWORD CLOSE” press ENTER to confirm password cancel-lation., then press MENU/EXIT to return to standby mode.Restricted access IDThis is a 4-digit numeric password that is must be input to gain access tomachine operations when the machine is set in the Restrict Access mode.Up to 24 RESTRICTION ID passwords can be registered at one time.Speed access No. 06.Setting restricted access ID1. Press MENU/EXIT to enter the menu.2. Enter speed access No. 06 and wait.3. Enter the department number (1-24), press ENTER.4. Enter the 4-digit password (0000 to 9999) using numeric keypad,press ENTER.5. If number is already registered, display will show “ALREADYEXIST”.6. Enter another 4-digit ID number, press ENTER.7. Repeat steps 3 to 6 until all desired ID numbers have been regis-tered.8. Press MENU/EXIT to return to standby mode.Cancelling restricted access ID1. Press MENU/EXIT to enter the menu.2. Enter speed access No. 06, wait.3. Enter the department number (1-24), press ENTER.4. Enter the 4-digit password (0000 to 9999) using numeric keypad,press ENTER.5. If ID matches registered number, display will show “ID CLOSE?”If no match with registered number, display will show “INVALIDID”.6. At “ID CLOSE” press ENTER to confirm ID cancellation.7. Press MENU/EXIT to return to standby mode.5750GB.book Page 71 Tuesday, June 6, 2000 8:08 PM
