Oki PAGE 12i User Manual

Also see for OKIPAGE 12i Series: User guide Brochure & specs User guide User guide User guide

Contents

3. NETWORK SETUP FOR EACH OPERATING SYSTEM12prompted to enter a printer name. Type in a printer name youwish to register. (Make sure not to use an already existing printername.)6 Press the Enter key in the text box “Type:” and select “RemoteOther/Unknown” from “Printer types”.7 Press the ESC key and select “Yes” in “Save changes”.8 Press the ESC key repeatedly to return to “Available Options”.9 Press the ESC key and select “Yes” in “Exit PConsole”. The setupis completed.5. Starting the print server and connecting this network card• When print server is used on the file server:Load PSERVER.NLM. The PSERVER.NLM has been copied toSYS:SYSTEM when the file server was installed.1 Enter the following in the system console of the file server:LOAD PSERVER print server name2 To exit the print server, press Alt key and Esc key simultaneouslyto return to the system console and enter the following:UNLOAD PSERVER print server name• When workstation is used specifically as the print server:Execute PSERVER.EXE. The PSERVER.EXE and the relevant fileshave been copied to SYS:PUBLIC when the file server was installed.1 To start up the print server, these files must be accessed. Log into the file server and map the search drive to SYS:PUBLIC orcopy the necessary files to the local floppy disk or hard disk.2 Change SHELL.CFG file or NET.CFG file so that the workstationdedicated to the print purpose can support adequate connections.Which CFG file you will edit depends on the NetWare client thathas been installed.Type the following line in SHELL.CFG or NET.CFG:SPX CONNECTIONS = 603 Boot MS-DOS and NetWare shell. To do so, enter the followingat prompt of the workstation dedicated to print:PSERVER file server name/print server name4 To close the print server, close it from PCONSOLE. EnterPCONSOLE from the client and start PCONSOLE.