Oki Pacemark PM4410 Setup Manual
Also see for Pacemark PM4410: User guideInstallation and setupUser guideUser guideInformation sheet
                                                                        | |
Contents
| 
E-16 Pacemark 4410 Setup GuideConnect to the Computer/NetworkConnecting the Parallel PortThe parallel port is a standard IEEE-1284-compatible,36-pin port. It requires a shielded IEEE-1284-compatible,bi-directional cable no longer than 6 ft. (1.8 m).1. Open the port access cover.2. Plug the interface cable into the parallel port and secure it with thewire loops.3. Close the port access cover, and attach the other end of the cable tothe computer and secure it with the screws.Default settings for the parallel interface (see Section 1 ofyour on-line Pacemark 4410 User’s Guide for information onchanging Menu settings):I Prime = Buffer PrintPin 18 = +5VAuto Feed XT = Invalid (Epson FX emulation only)BiDirection = Enable |
Related manuals for Oki Pacemark PM4410
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine