Oki Pacemark PM4410 Setup Manual
Also see for Pacemark PM4410: User guideInstallation and setupUser guideUser guideInformation sheet
                                                                        | |
Contents
| 
E-17Pacemark 4410 Setup GuideConnecting the Serial PortThe serial port is a standard RS-232C, 25-pin port, withselectable baud rates of up to 38.4 Kbps. It requires ashielded RS-232C cable which is UL and CSA approvedand no more than 50 feet (15 m) in length.1. Open the port access cover and plug the interface cable into the serialport.2. Secure the cable with the screws and close the port access cover.3. Attach the other end of the cable to the computer and secure it withthe screws.Default menu settings for the serial interface (see Section 1 ofyour on-line Pacemark 4410 User’s Guide for information onchanging Menu settings):Parity = None Baud Rate = 9600 BPS# Serial Bits = 8 Bits DSR Signal = ValidProtocol = Ready/Busy DTR Signal = Ready on Power UpDiagnostic Test = No Busy Time = 200 mSBusy Line = SSD- |
Related manuals for Oki Pacemark PM4410
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine