E-32 Pacemark 4410 Setup GuideRolling ASCII TestTo print a Rolling ASCII test:1. Make sure that continuous form paper at least 9 inches wide isloaded and that the printer is turned off.Caution! If you have 9-inch paper loaded, be sure that thePage Width menu setting for the paper path you are usingis changed from 13.6 inches to 8 inches before starting theRolling ASCII test. If you don’t, the printhead could bedamaged.2. Press and hold PATH/TOF (1) while turning the printer on.To stop the test, press ON-LINE/RESET.1
