Olivetti D-COPIA 120D Operation Manual

Contents

Olivetti D-COPIA 120D Operation Manual Manual pdf 14 page image

12CONNECTING THE POWER CORD1 Ensure that the power switch ofthe unit is in the OFF position.Insert the attached power cordinto the power cord socket at therear of the unit.2 Plug the other end of the power cord into the nearest outlet.Power onEnsure that the power switch of the unit is in the OFF position. Plug the other end ofthe power cord into the nearest outlet. Turn the power switch on the left side of theunit to the "ON" position. The start ( ) indicator will light up and other indicatorswhich show the initial settings of the operation panel will also light up to indicate theready condition. For the initial settings, see the "Initial settings of operation panel"described on the next page.If you use the unit in a country other than the country where the unit waspurchased, you will need to make sure that your local power supply iscompatible with your model. If you plug the unit into an incompatiblepower supply, irreparable damage to the unit will result.Only insert the power cord into a properly grounded wall socket.Do not use extension cords or power strips.•The unit will enter a power save mode once the set time has elapsedwithout any unit operation . The settings of the power save modes canbe modified. See "USER PROGRAMS" (p.56).•The unit will return to the initial settings a preset amount of time afterthe end of copy, or scanner job. The preset amount of time (auto cleartime) can be changed. See "USER PROGRAMS" (p.56).