Olivetti D-COPIA 120D Operation Manual

Contents

Olivetti D-COPIA 120D Operation Manual Manual pdf 36 page image

34USING THE SCANNER MODEThe scanner driver for this unit includes an STI (Still image) driver and WIA(Windows Image Acquisition) driver. You can install software that supports the STIdriver and WIA driver to enable scanning using the operation panel of the unit.Using the Button ManagerSetting up the Button ManagerThe Button Manager accessory software supports the STI driver and WIA driver. Setupthat is required in Windows to use the Button Manager is explained in the following.Windows XP1 Click the "start" button, select "Control Panel" and click"Printers and Other Hardware", and then click "Scanners andCameras" in the start menu. Right click the "Olivetti d-Copia150D" icon and click "Properties" in the menu that appears.2 In the "Properties" screen, click the"Events" tab.3 Click the "Select an event" button andselect "ScanMenu SC1" from the pull-downmenu. Select "Button Manager (OLIVETTIPersonal MFP Series)" in "Start thisprogram" and click "Apply".4 Repeat step 3 to set "ScanMenu SC2" through "ScanMenuSC6".Click the "Select an Event" button and select "ScanMenuSC2" from the pull-down menu. Select "Button Manager (Olivetti Personal MFP Series)" in"Start this program" and click "Apply". Do the same for each ScanMenuthrough "ScanMenuSC6". When the settings have been completed, click the"Close" button to close the screen. When the settings have been completedin Windows, start the Button Manager. Adjust detailed settings and thenscan an image from the unit.For the procedures for starting Button Managerand adjusting settings, see "Scan Parameter Settings Dialog Box" (p.36).For problems with the scanner function, see the online manual or thehelp file for the driver.Olivetti d-Copia 150D PropertiesButton Manager (Olivetti PersonalOlivetti d-Copia 150D PropertiesButton Manager (Olivetti Personal