Olivetti D-COPIA 120D Operation Manual

Contents

Olivetti D-COPIA 120D Operation Manual Manual pdf 51 page image

495Stream feeding modeThe stream feeding mode allows easy operation of continuous copying from theSPF. If the stream feeding mode has been enabled using user program No.4, theSPF ( ) indicator will blink approximately 5 seconds after the last original hasbeen fed by the SPF. While this indicator is blinking, any new originals placed in theoriginal feeder tray will be fed and copied automatically. If the stream feeding modehas been disabled, the start ( ) key must be pressed each time the originals areset even immediately after completion of a copy run from the SPF. The defaultsetting of the stream feeding mode is "ON". See "USER PROGRAMS" (p.56).SET THE COPY QUANTITYSet the number of copies using the two copy quantity ( , ) keys when copyingfrom the original table or from the SPF if installed.• Press the right copy quantity key to set the unit digitfrom 0 to 9. This key will not change the tens digit.• Press the left copy quantity key to set the tens digitfrom 1 to 9.•Press the clear ( ) key to clear an entry if a mistake is made.•A single copy can be made with the initial setting, i.e., when "0" isdisplayed.