Y100250-48-128.11 HORIZONTAL MAGNETIC DEVICE/MICR PRESS POSITIONINGMACHINE CONDITION:Cam crank (4) against the shortest cam radius.Position press (1) inside conveyor (2) with an indent of 0.5-1 mm and then phase cam (3) so as to movecam crank (4) against its shortest radius. Secure the cam crank on the shaft with its screw (5). Makesure that the press is indented throughout the entire paper path).OBJECTIVE ADJUSTMENT:Press in ints working position.PROCEDURE:Rotate the cam until the cam crank (4) moves against its maximum radius; then, with the press restingon the paper feed surface, check for a clearance in the joint at point "A".Fig. 8-1112345A0.5-1
