Y100250-42-62.3 BUTTON AND LED FUNCTIONS IN THE IBM 9068 (4722) EMULATIONThis section describes the button functions and LED indications of the PR2 E printer when in the IBM4722 emulation.2.3.1 BUTTON FUNCTIONSThe buttons have the following functions:LOCAL/BREAK Toggles the printer between the on-line and off-line states.STATION 1/EJECT Assigns the printer to operator 1. SW-monitored button.STATION 2/EJECT Assigns the printer to operator 2. SW-monitored button.Pressing the STATION 2/EJECT button while powering on the printer prints the self-test.2.3.2 LED INDICATIONSWhen on, the LEDs inform of the following machine states:ON Green LED, indicates that the machine is powered on.READY Yellow LED, indicates that the printer is on-line and that a document is present.LOCAL Yellow LED, indicates that the printer is off-line.STATION 1 Yellow LED, indicates that the printer is assigned to operator 1.STATION 2 Yellow LED, indicates that the printer is assigned to operator 2.Since the buttons and LEDs are managed via SW, their functions and usage may vary according to theapplication SW being used.
