9-14 Y100250-49.2.11 ROLLER SUPPORT TRAY DISASSEMBLY/REASSEMBLY- Remove the printer case (section 9.2.1) and console (section 9.2.2).- Remove the mechanical assembly, separating it from the base of the machine (section 9.2.3).- Free the carriage reset photosensor wires from their plastic retaining clips (1).- Remove the upper part of the mechanical assembly (section 9.2.7).- Remove the four screws (2) and then extract the tray, being careful to avoid loosing the transmissionjoint (3) and the tray's soundproofing.Fig. 9-13Note: During reassembly, make sure to correctly reposition the transmission joint and soundproofingbefore tightening the screws.Fig. 9-12122 3
