Configuring the fax print settings (for the administrator)66-18 d-Color MF552/452/362/282/2226.146.14 Configuring the fax print settings (for the administrator)Default print settings ([Print Paper Selection]/[Min. Reduction for RX Print])A received fax is printed according to the following conditions depending on the page size of the fax.A standard-size fax, such as those received in the Letter/A4 size, is printed on the same standard size paperwith slight reduction (Default: [96]%).For example, a Ledger/A3-sized fax is printed on Ledger/A3 paper, and a Legal/B4 fax on Legal/B4 paper,while reducing the print size to 96% respectively.For details on the fax print settings, refer to page 11-21.Tips- For faxes that are longer in the longitudinal direction than the standard size, the optimal paper size isdetermined based on the width and length of the fax, and printed on paper of the same size. If the op-timal size paper is not available, the fax is printed on paper of a similar size.Fixing the print paper size ([Print Paper Size])You can always print on the specified size of paper irrespective of the paper size of the received fax.If the size of the received fax is different from the specified print paper size, the fax is printed while increasingor reducing the size according to the print paper size.For details on how to configure the settings, refer to page 11-22.
