d-Color MF552/452/362/282/222 2-52.3 Option settings 22.3 Option settingsRegistering frequently used fax numbersRegistering a frequently used fax numbers on this machine will save you the trouble of entering them eachtime you send a fax.For details on how to register, refer to page 8-3.Setting up the usage of an additional lineSet how you want to use a second line, if any.You can configure functional settings specific to the second line that are different from the first to use the twolines differently.For details on how to configure the settings, refer to page 11-31.Related setting (for the administrator)- If there are two lines operating, you can opt to enable or disable use of different sender names by line(Default: [OFF]). For details, refer to page 11-24.– For details on how to register sender names, refer to page 11-18.- If there are two lines operating, you can opt to enable or disable fax reception by line (Default: [OFF]).For details, refer to page 11-23.– The TSI Routing can be configured for each line. For details, refer to page 6-7.– The Fax Forwarding can be configured for each line. For details, refer to page 6-8.– The Memory RX can be configured for each line. For details, refer to page 6-9.– PC-Fax RX can be configured for each line. For details, refer to page 6-15.Using an LDAP server to specify addressesWhen an LDAP server or Active Directory is used for user management purposes, you can search for or spec-ify fax numbers using the server. To use the LDAP server to specify a destination, you must register the serveron this machine.The registration procedure is explained using Web Connection. For details, refer to [User's Guide: Web Man-agement Tool].d ReferenceFor details on how to search using the LDAP server, refer to page 3-19.
