184Appendix 4: Troubleshooting (continued)Problem Solution PageProblem Solution PageSomething other than lines displayed in thecontrol panel? Cannot operate the camera?Did you put the camera in playback mode bypressing the monitor button twice?Is the mode dial set for playback , printreserve mode , or setup/connection mode?Did you press the monitor button ?See “Cannot operate the camera, monitor andcontrol panel blank.”In the playback mode, the played back imageis displayed for viewing. Press the monitorbutton to restore the camera to theshooting mode.Set the mode dial to P, A, S, or M.Press the monitor button to switch onthe monitor.Something other than lines displayed in thecontrol panel? Cannot operate the camera?Mode dial set to playback ? Or withmode dial set to P, A, S, or M, did yourapidly press the monitor button twice?“NO PICTURE” is displayed in the monitor?“NO CARD” is displayed in the monitor?See “Cannot operate the camera, monitor andcontrol panel blank.”Set the mode dial to playback , or aftersetting the mode dial to P, A, S, or M rapidlypress the monitor button twice.There are no pictures stored on the card.Make sure that a card that contains imagesis inserted, or take a picture.No card is installed in the camera. Insert acard. 37 70 46 182 30 189 46 182The monitor and viewfinder displays are different.Cannot play back images on the monitor.
