52Switching the Camera OffAlways switch the camera off immediately after every shooting session. If you leave thecamera on while it is not being used, it will automatically enter the sleep mode and thenautomatically switch itself off after one hour. ( 128) Always switch the camera off beforechanging batteries or before storing the camera in a case or bag.1 Move the power switch to OFF.The camera switches off.If an image is being saved on a card (thecard access lamp will be blinking), thecamera will not power off until the imagehas been saved on the card.2 Attach the lens cap.Press inward on the cap’s latches, fit thecap over the lens, and then release thelatches. (To remove the cap: Press on thelatches and pull the cap off.)○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○Caution• While the card access lamp is blinking, never open the card compartment cover or unplug the ACadapter. If the power supply to the camera is interrupted while the camera is saving a picture on acard, this could cause the camera to reset all operation mode settings (date, time, etc.), coulddamage images already stored on the card, or could prevent other pictures from being saved onthe card.1ONOFF2